2

ASME A112.18.2/CSA B125.2

Plumbing waste fittings

3

ASME A112.18.6/CSA B125.6

Flexible water connectors

4

ASME A112.19.2/CSA B45.1

Ceramic plumbing fixtures

5

ASSE 1016-/ASME A112.1016/CSA B125.16

Performance requirements for automatic compensating valves for individual showers and tubjshower combinations

6

ASSE 1061

Performance Requirements for push fit fittings

7

NSF 372

Drinking Water System Components - Lead content

8

Watersense High-Efficiency Lavatory Faucet Specification

Watersense High-Efficiency Lavatory Faucet Specification

9

WaterSense Specification for Showerheads

WaterSense Specification for Showerheads

10

Watersense Specification for Tank-Type Toilets

Watersense Specification for Tank-Type Toilets

11

AS/NZS 3718

Water supply - Tap ware

12

AS/NZS 3662

Performance of showers for bathing

13

AS 1172

Water closets (WCs)

14

AS 4032

Water supply - Valves for the control of heated water supply temperatures

15

AS/NZS 4020

Testing of products for use in contact with drinking water

16

AS/NZS 6400

Water efficient products - Rating and labelling

17

ATS 5200.012

Technical Specification for plumbing and drainage products Part 012_In-line valves for use in plumbing water supply systems - Miscellaneous types metallic and non-metallic

18

AS 3688

Water supply and gas systems - Metallic fittings and end connectors

19

ISO 3822

Acoustics — Laboratory tests on noise emission from appliances and equipment used in water supply installations

20

EN 817

Sanitary tapware - Mechanical mixing valves (PN10) - General technical specifications

21

EN 200

Sanitary tapware - Single taps and combination taps for water supply systems of type 1 and type 2 - General technical specification

22

EN 1112

Sanitary tapware - Shower outlets for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification

23

EN 1113

Sanitary tapware - Shower hoses for sanitary tapware for water supply systems of type 1 and type 2 - General technical specification

24

EN 1111

Sanitary tapware - Thermostatic mixing valves (PN10) -General technical specification

25

EN 246

Sanitary tapware - General specification for flow rate regulators

26

EN 248

Sanitary tapware - General specification for electrodeposited coating of Ni-Cr

27

EN 274

Waste fittings for sanitary appliances

28

EN 816

Sanitary tapware Automatic shut-off valves PN10

29

EN 1213

Building valves - Copper alloy stopvalves for potable water supply in buildings - Tests and requirements

30

EN 13828

Building valves - Manually operated copper alloy and stainless steel ball valves for potable water supply in buildings - Tests and requirements

31

EN 15091

Sanitary tapware - Electronic opening and closing sanitary tapware

32

EN 14124

Inlet valves for flushing cisterns with internal overflow

33

EN 16145

Sanitary tapware - Extractable outlets for sink and basin mixers -General technical specification

34

EN 16146

Sanitary tapware - Extractable shower hoses for sanitary tapware for supply systems type 1 and type 2 -General technical specification

35

DIN 3227

Valves for potable water supply in buildings - angle service valves - requirements and tests

36

DIN 3509

Valves for potable water supply in buildings - Draw-off taps (PN 10) - Requirements and tests

37

EN 215

Thermolstatic radiator valves - requirements and test method

38

NKB 4

Product rules for sanitary tap for hot and cold water supply systems

39

SASO 1913

Sanitary appliances - tapware: shower and spray hoses

40

SASO 1914

Sanitary appliances - tapware: method of test forshower and spray hoses

41

SASO 2655

Sanitary appliances: general requirements for plumbing fixture fittings

42

SASO 2656

Sanitary appliances: method of test for plumbing fixture fittings